INTRUDER frame

Frames are made to order, please contact me if you're interested so we can get one started for you!

INTRUDER single downtube frame:

- Designed for Shovelhead stroker engines or stock and back. (Stock evo's will fit but fit snug see pics)
- for H-D 4spd transmissions. Trans sits high for fully aligned motor/trans, also allows for stock cone primaries. (if you plan on putting another trans in be aware the seat post sits at 18 degrees, which is 2 degree further back than stock. May need to notch trans lid or seat post tube)
- stock location top motor mount in beefy 1" tube
- 30 degree rake
- 3+ up stretch, zero out
- stock panhead length, 1" drop in rear.
- for disc brake application axel plates, stock size 3/8" fine thread axel adjusters.
- fully hand bent frame from USA made .120" wall DOM steel tubing. - - TIG welded in sequence, locked in precision fixtures to ensure straightest frame possible
-Tubes are semi-polished before bending to remove mill scale and clean base for paint/powder.
- no kickstand mount as it's always best to set your kick stand "lean" while building the bike. Recommend a weld-on style that several vendors sell.

***Shipping is not included*** I've found FedEx ground is usually the best option. Usually ranges between $150-$500 depending where you are located in the USA. Pick up is available and your best option. (International shipping currently unavailable)

*** please allow minimum 3-4 weeks build time

*** for show use only, no mso currently.